Dragon scaffolding
 
Products
 
Our Products
 
Links
Level
Supa Tie
Tube End Cap
Pressed Fittings
Board Retaining Clamp
Joint Pin
Double Coupler
Scaffold Band and Plate
 

Drop Forged Fittings

     
Wrapover Coupler ..
  • Accredited to BS EN 1139 : Section 2.2. 1991
  • Silver or gold zinc plated finish
  • Connects 48.3mm scaffold tubes at right angles and transoms to ledgers
  • Customized indent company name as per request*
  • Contact us for quote and more information
     
Swivel Coupler  
  • Accredited to EN74 Class A and BS EN 1139 : Section 2.2. 1991
  • Silver or gold zinc plated finish
  • Connects two 48.3mm scaffold tubes at any angles
  • Customized indent company name as per request*
  • Contact us for quote and more information
   
Board Retaining Clamp  
  • Conforms to BS EN 1139 : Section 2.2. 1991
  • Silver or gold zinc plated finish
  • Used for securing scaffold boards
  • Boards are quickly locked in the correct position
  • Customized indent company name as per request*
  • Contact us for quote and more information
     
Joint Pin  
  • Conforms to BS EN 1139 : Section 2.2. 1991
  • Silver or gold zinc plated finish
  • Used for connecting two 48.3mm scaffold tubes' ending
  • Must be used vertically only
  • Customized indent company name as per equest*
  • Contact us for quote and more information
     
Double Coupler   
  • Accredited to EN74 Class B and BS EN 1139 : Section 2.2. 1991
  • Silver or gold zinc plated finish
  • Connects two 48.3mm scaffold tubes at right angles
  • Customized indent company name as per request*
  • Contact us for quote and more information
     
Double & Swivel Coupler (USA Type)  
  • Conforms to EN74 Class A & B and BS EN 1139 : Section 2.2. 1991
  • Silver or gold zinc plated finish
  • Fit on any types of 48.3mm scaffold tubes
  • Anti-slip design add-on  
  • Customized indent company name as per request*
  • Contact us for quote and more information
     
Girder Coupler (Gravlocks)  
  • Conforms to BS EN 1139 : Section 2.2. 1991 and AS1576.2 - 1991
  • Silver or gold zinc plated finish
  • Must be used in pairs
  • Provides a fixed 90 degrees coupling of a 48.3mm scaffold tube to an I-beam girder
  • Customized indent company name as per request*
  • Contact us for quote and more information
     

*Subject to minimum order requirement.
All items are manufactured in accordance with BS EN ISO 9002
Please contact us for more information on other Pressed Fittings Products

Drop Forged Fittings: Wrap Over Coupler | Double Coupler | Swivel Coupler | Girder Coupler (Gravlocks) | Joint Pin | Double & Swivel Coupler | Board Retaining Clamp
Related Scaffolding Products: Drop Forged Fittings | Pressed Fittings
 
© 2014 Dragon Scaffolding Manufacture Ltd.All rights reserved. | Sitemap