Dragon scaffolding
 
Products
 
Our Products
 
Links
Level
Level
Supa Tie
Tube End Cap
Pressed Fittings
Board Retaining Clamp
Joint Pin
Double Coupler
Scaffold Band and Plate
 

Scaffold Ancillaries

     

Please contact us
for more details

..
  • Performs to BS2037 and EN131 Class 1
  • Class one performance criteria for twist, strength, rigidity and deflection.
  • The rungs are tested for 265Kg loading
  • Epoxy coated for rust protection
  • Non-Slip rungs
  • Extra large & extra strong rubber feet for improved safety
  • Epoxy color at your choice
  • Length available 3M, 4M, 5M, 5.5M, 6M, 7M, 8M  
  • Conforms to EN131 Class 1 
  • Contact us for quote and more information
     
 
  • For improved safety, high visibility yellow or red plastic materials are used
  • Finest plastic material to protect floor sufaces
  • Good for indoor or outdoor with Anti-slip design
  • Suitable for any type of base plates
  • Contact us for quote and more information
   
 
     
 
     
 
  • Available in 45m x 2m or 45m x 3m
  • Approved for temporary containment and weather protection
  • Clear reinforced low density polyethylene with 2300 denier spaced 9mm x 9mm
  • Contact us for quote and more information
     
 
  • For improved safety in public and construction area, high visibility color materials are used
  • Customized Color
  • Prevent people damage by scaffold tube ends
  • Fit any types of 48.3mm scaffold tube ends
  • Contact us for quote and more information
     
 
  • For improved safety in public and construction area, high visibility color materials are used
  • Customized Color
  • Prevent people damage by scaffold fittings
  • Fit any types of scaffold fittings standard screw ends
  • Contact us for quote and more information
     
 
     
 
  • Conforms to BS EN 729 standard
  • Base steel conforms to BS EN 4449
  • Pre-welded conforms to BS EN 1461
  • Fit on any type of scaffold tubes
  • Finest quality finish to increase strength
  • Z/P or H.D.G. Finish
     
 
  • Conforms to BS EN 729 standard
  • Base steel conforms to BS EN 4482
  • Pre-welded conforms to BS EN 1461
  • The top and bottom swivel hooks locks onto handrail and toeboard
  • Finest quality finish to increase strength 
  • Z/P or H.D.G. Finish
     
 
     
 
     
 
     
 
     
 
     
 
     
 
     
 
     
 
     
 
     
 
     
 
     

*Subject to minimum order requirement.
All items are manufactured in accordance with BS EN ISO 9002
Please contact us for more information on other Pressed Fittings Products

Scaffold Ancillaries: Light Weight Orange Steel Ladder | Tredda Plate | Level | Foam Padding | Scaffold Sheeting | Tube End Cap | Fitting End Cap | Toggle Ties |f Standard Brickguard | Swivel Brickguard | Base Plate | Board Bands | Ready Lock Transom | Scaffold Band and Plate | Scaffold Bolt and Nut | Plastic Cable Tie | Scaffold Castor | Scaffold Connector Pin | Debris Netting | Drop Forged M16 Ring Bolt | Scaffold Galvanized Nail | Putlog Head Adaptor
Related Scaffolding Products: Drop Forged Fittings | Pressed Fittings
 
© 2014 Dragon Scaffolding Manufacture Ltd.All rights reserved. | Sitemap